|
| OCCUPANT RESTRAINT SYSTEMS |
| PARALLEL LAP BELTS |
|
|
FE200600 Length 108"
Premium Lap Belt for Series L Track |
FE200612 Length 108"
Premium Lap Belt for Series A Track |
|
|
FE200594 Length 98"
Standard Lap Belt for Series L Track |
FE200691 Length 98"
Standard Lap Belt for Series A Track |
|
| INTEGRATED LAP BELTS |
|
|
AL700842 Length 96" Integrated Lap Belt
Integrated Lap Belt with Triangular Fittings to attach to stud on rear wheelchair tie-down retractor assemblies. For use with AL700 Titan Systems only |
FE200842 Length 96" Integrated Lap Belt
Integrated Lap Belt with snap hooks to attach to D rings on rear wheelchair tie-down assemblies |
|
|
FE200595 Length 80" Integrated Lap Belt
Integrated Lap Belt with snap hooks to attachD rings on rear wheelchair tie-down assemblies. For use with FE500 Manual Systems only |
FE200637 Length 13"
FE200637-020-05 Length 20"
Lap Belt Extensions |
|
| INTEGRATED COMBINATION BELTS |
AL70027
AL700856
Integrated Combination Belt with triangular fitting to attach lap belt to stud on rear wheelchair tie-down assemblies. A Velcro strip is provided to keep belt against vehicle sidewall when not in use.
The AL700856 is designed to allow the retractor to be installed on a sidewall rail which is typically mounted 10" above the vehicle floor. For use with the AL700 Titan Systems only.
|
 |
FE200727
FE200856
Integrated Combination Belt w. snap hooks to attach lap belt to D ring on rear wheelchair tie-down assemblies. A Velcro strip is provided to keep belt against vehicle sidewall when not in use.
The FE200856 is designed to allow the retractor to be installed on a sidewall rail typically mounted 10" above the vehicle floor |
 |
AL700727HA
AL700856HA
Integrated Combination Belt w. Height Adjuster
Integrated Combination Belt with triangular fitting to attach lap blet to stud on rear wheelchair tie-down retractor assemblies. Height adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against vehicle sidewall when not in use.
The AL700856HA is designed to allow the retractor to be mounted on a sidewall rail which is typically mounted 10" above the vehicle floor. For use with AL700 Titan Systems only. |
 |
FE200727HA
FE200856HA
Integrated Combination Belt w. Height Adjuster
Integrated Combination Belt with snap hooks to attach lap belt to D Rings on rear tie-down assemblies. Height adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep the belt against vehicle sidewall when not in use.
The FE200856HA is designed to allow the retractor to be installed on a sidewall rail which is typically mounted 10" above the vehicle floor. |
 |
| DUAL RETRACTABLE INTEGRATED COMBINATION BELTS |
AL700868-2
AL700868-4
Dual Retractable Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor.
The AL700868-4 offers an angled mounting bracket on the upper retractor to accomodate angled vehicle sidewall wire molding. For use with AL700 Titan Series only. |
 |
FE200868-2
FE200868-4
Dual Retractable Combination Belt with snap hooks to attach lap belt to D Rings on rear wheelchair tie-down retractor assemblies and a flat mounting bracket on the upper retractor .
The FE200868-4 offers an angled mounting bracket on the upper retractor to accomodate angle vehicle sidewall wire molding. |
 |
|
|
| SHOULDER BELTS |
FE200599 Length 52"
FE200732 Length 82"
Non-Retractable Shoulder Belt for Series L Track
Non-Retractable Shoulder Belt attached to Series L Track on vehicle sidewall, providing increased positioning flexibility for multiple station vehicles. |
 |
FE200613 Length 52"
FE200716 Length 82"
Non-Retractable Shoulder Belt for Series A Track
Non-Retractable Shoulder Belt attaches to Series A Track on vehicle sidewall providing increased positioning flexibility for multiple station vehicles. |
 |
FE200599HA Length 72"
Non-Retractable Shoulder Belt w. Height Adjuster
Non-Retractable Shoulder Belt attaches to Series L Track on vehicle sidewall and floor, providing increased positioning flexibility |
 |
FE200710 Length 52"
FE200710L Length 82"
Non-Retractable Fixed Point Shoulder Belt
Non-Retractable Fixed-Point Shoulder Belt can be mounted directly to the vehicle sidewall or Series L Track with FE200747 or FE200736 Mounting Hardware Kit. |
 |
FE200865 Length 63"
Non-Retractable Fixed-Point Shoulder Belt with Quick Connect
The Quick Disconnect Shoulder Belt can be mounted to the exisiting original equipment shoulder belt anchor bolt. This allows it to be used along with original equipment shoulder belt. The Quick Disconnect Shoulder Belt can be easily removed, by using the single button buckle, allowing a passenger sitting on the flip seat to use the original equipment shoulder belt. When a wheelchair is placed in the same area,the Quick Disconnect Shoulder Belt connects to the short anchor strap by using the single pus-button buckle. |
 |
FE200710HA Length 72"
Non-Retractable Fixed-Point Shoulder Belt w. Height Adjuster
Non-Retractable Fixed-Point Shoulder Belt web guide can be mounted directly to the vehicle sidewallor Series L Track w. FE200745, FE200747 or FE200736 Mounting Hardware Kit.
Bottom bracket can be mounted to vehicle floor or sidewall, or can be converted from a fixed-point to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height Adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep the belt ends up against the vehicle sidewall when not in use.
|
 |
FE200604 Length 112"
FE200604L Length 136"
Retractable Fixed-Point Shoulder Belt
Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted ftrom a fixed-point to a Trak Apllication with FE200747, FE201037 or Fe201039 Mounting Hardware Kit.
|
 |
FE200936 Length 100"
Retractable Fixed-Point Shoulder Belt
Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment for proper shoulder blet placement on the occupant. Retractor can be mounted directly to the upper point of the vehicle sidewall with mountingf hardware included.
|
 |
| |
|
FE200604HA Length 136"
Retractable Fixed-Point Shoulder Belt w. Height Adjuster
Retractable Fixed-Point Shoulder Belt provides automatic webbing adjustment. Web guide can be mounted directly to the vehicle sidewall or Series L Track with FE200745, FE200747 or FE200736 Mounting Hardware Kit. Retractor can be mounted to the vehicle floor or sidewall, or can be converted to a track application with FE200747, FE201037 or FE201039 Mounting Hardware Kit. Height adjuster provides nearly 12" of vertical adjustment to allow proper shoulder belt placement on the occupant. A Velcro strap is provided to keep belt against the vehicle sidewall when not in use. |
 |
|
|
| OCCUPANT RESTRAINT SYSTEM ACCESSORIES |
|
 |
FE200745 Sidewall Mounting Kit
This kit provides an installation point on vehicle sidewall for the web guide of fixed-point shoulder belts. |
FE200747 Series L Track Mounting Kit
This kit allows semi-permanent mounting of fixed-point shoulder belts into Series L Track on the vehicle sidewall. |
|
|
|
|
FE200736
Series L Track Adjustable Sidewall Mounting Kit
This kit converts fixed-point occupant restraints to a Series L Track application on vehicle sidewall. Used with FE201037 or FE201039 Mounting Kit on the bottom retractor. Retractable fixed-point restraints can be moved along vehicle tracks without the use of tools. |
FE201037
Series L Track Mounting Kit for Occupant Restraint Retractors
This kit converts fixed-point retractable occupant retractors to Series L Track application on vehicle floor. Used with FE200736 Series L Track Adjustable sidewall Mounting Kit. Retractable fixed-point occupant restraints can be moved along Series L Track without the use of tools. |
FE201039
Series A Track Mounting Kit for Occupant Restraint Retractors
This kit converts fixed-point retractable occupant restaint retractors to Series A Track application on vehicle floor. Used with FE200736 Series L Track Adjustable Sidewall mounting kit. Retractable fixed-point occupant restraints can be moved along Series A vehicle floor track and Series L vehicle sidewall track without the use of tools |
|
| SYSTEM TRACK |
L TRACK-WITHOUT MOUNTING HOLES
MEDIUM DUTY
F750-01 100" SECTION |
|
L TRACK WITH HOLES
MEDIUM DUTY W. MOUNTING HOLES
FE750-01-PD4 1/4" HOLES 100" SECTION
HEAVY DUTY W. MOUNTING HOLES
FE744-01-PD4 1/4" HOLES 100" SECTION
FE200761 1/4" HOLES 8" SECTION
FE200762 1/4" HOLES 9" SECTION |
|
FLANGED L TRACK WITHOUT MOUNTING HOLES
MEDIUM DUTY
FE751-01 100" SECTION |
|
MEDIUM DUTY W. MOUNTING HOLES
FE751-01-PD2 2" CENTERS-1/4" HOLES-100" SECTION
FE751-01-PD4 1/4" HOLES-100" SECTION
FE751-01-100WBT 5/16" HOLES-100" SECTION
HEAVY DUTY W. MOUNTING HOLES
FE748-01-PD4 1/4" HOLES-100" SECTION
FE748-01-PD4C CLEAR ANODIZED FINISH-1/4" HOLES-100" SECTION |
|
ANGLED L TRACK WITHOUT MOUNTING HOLES
MEDIUM DUTY
FE752-01 100" SECTION |
|
ANGLED L TRACK W. MOUNTING HOLES
MEDIUM DUTY
FE752-PD4 100" SECTION
HEAVY DUTY
FE200763 1/4" HOLE-8" SECTION
FE200765 1/4" HOLE-9" SECTION
|
|
A TRACK-VERTICAL W. HOLES
HEAVY DUTY
2025 10 FOOT SECTION
2025-060 60 INCH SECTION |
|
A TRACK-HORIZONTAL W. HOLES
HEAVY DUTY
FE702-01-048 48 INCH SECTION
FE7-2-01-060 60 INCH SECTION |
|
|
| FLOOR PLATES |
|
|
FE200844SS
Stainless Steel Series L Sin gle Bolt Flush Mount Floor Plate Kit
Kit includes: Stainless Steel Case with Series L Track Section, Backing Plate, 3-1/2" Bolt & Hex Nut |
FE200742
Series A Floor Plate Kit
Kit includes: FE200740 (qty 1) Floor Plate, FE200741 (qty 1) Backing Plate, Nylon Lock Nuts (qty 4) 3/8-16, GR5 Carriage Bolts (qty 4) 3/8"-16 x 2" & Washers (qty 4) 3/8ID x 2-1/2" OD x 1/16" Thick
|
|
|
FE200922 Solo Floor Anchor
Kit includes: Solo Floor Anchor, Backing Plate, Lock Washer & Nut
For use with Retractor Series Systems only |
FE200937-2 Solo Anchor Installation Tool
Tool required for all FE200922 Solo Floor Anchor installations to prevent the floor anchor from rotating during installation. Tool is reusable. |
|
| SYSTEM TRACK ACCESSORIES |
|
|
|
FE201005 1/4" BOLTS
FE201006 5/16" BOLTS
This kit provides hardware to install Series L Track into vehicle floor. Bolts are 3" long with automotive grade plating, giving up to 10 times the corrosion resistance of standard zinc plated finishes. A special sealant is applied under the bolt head to provide a seal between the hole in the track and the bolt. The kit comes with 100 bolts washers and locknuts. |
FE200744 Series L Track Seat Stud Fitting
For use in mounting vehicle seats in Series L Track. |
FE200739 Series L Track Double Lug Stud Fitting
This fitting is used as a bolt-on anchoring point for Series L Track applications where higher strength than the FE200744 is required. |
|
|
|
FE200751 Plastic Filler Strip
For use with Series L Track only. 25 ft. per roll. |
8663 SERIES L TRACK END CAP
For use with FE751-01 Series, FE748-01 Series and FE200763 L Track only |
8730 series a track end cap
For use with FE702-01 Series A Horizontal Track only. |
|
|
|
FE200750 12" Quick Strap
FE200750-16 16" Quick Strap
Attaches to the structural frame of the wheelchair and provides a quick and easy attachment point for the tie-down. |
SE-600 Vinyl Bag for Wheelchair Securement Kits
SE-601 Mesh Bag for Wheelchair Securement Kits |
|
|
SE-50 Seat Belt Cutter |
SE-52 Deluxe Seat Belt Cutter |
|
|
 |
GO2 Oxygen Cylinder Holder
Prevents tipping, falling or becoming a projectile during a sudden stop or maneuver. Mounts to Series L Track |
|
8726 Oversize Release Button for Wheelchair Tie-Down Retractors
Optional oversizedv release button easily fits over the existing release lever.
Button provides the operator with a larger release lever for the wheelchair tie-down retractor. Two per bag. |
Access Arize by Tie-Tech
Developed and invented to prevent wheelchair passengers from tipping backwards or falling off a wheel chair lift. Access Arize offers a much needed safety measure to ensure passenger safety. These belts help to protect the inboard platfrom of the lift as well as enabling the driver to have more control over the lift. |
|
|
|
|
.jpg)
